The MX3660 is an excellent stepper motor driver solution for DIY Nema 23 CNC electronics requiring only three motor drives.
With a working voltage of 20-60VDC and output current up to 6.0A, the MX3660 is a complete solution for driving 3 powerful two-phase stepper motors with high reliability. It offers high precision, excellent torque, extra low noise, very low motor heating, and smooth motor movement.
Based on the latest DSP technology and Leadshine’s advanced stepper control algorithms, the MX3660 offers features such as anti-resonance, programmable multi-stepping, input pulse smoothing, and automatic idle current reduction.
The MX3660 comes with a 25 pin header as well as a DB-25 connector for pin to pin compatibility with the older Gecko G540, allowing for a drop-in upgrade to superior digital technology for existing electronics systems as well as easy integration with an Ethernet Smoothstepper.
With a working voltage of 20-60VDC and output current up to 6.0A, the MX3660 is a complete solution for driving 3 powerful two-phase stepper motors with high reliability. It offers high precision, excellent torque, extra low noise, very low motor heating, and smooth motor movement.
Based on the latest DSP technology and Leadshine’s advanced stepper control algorithms, the MX3660 offers features such as anti-resonance, programmable multi-stepping, input pulse smoothing, and automatic idle current reduction.
The MX3660 comes with a 25 pin header as well as a DB-25 connector for pin to pin compatibility with the older Gecko G540, allowing for a drop-in upgrade to superior digital technology for existing electronics systems as well as easy integration with an Ethernet Smoothstepper.
Features/Specifications:
- Power up to 3 stepper motors
- Sophisticated stepper motor control based on the latest DSP technology
- Built-in breakout board and I/O
- Step & direction Control
- 200 KHz maximum frequency for each axis
- 20 - 60 VDC supply voltage
- 1.41 - 6.0A output current per axis
- 8 micro step settings: 1, 1/2, 1/4, 1/8, 1/10, 1/16, 1/32, 1/64
- 8 output current settings of 1.41 - 6.0A for each axis
- Damping and anti resonance
- Allowing individual output current & micro step settings for each axis
- Input pulse smoothing for less jittering, higher torque, and quicker response
- Extra low motor heating & noise
- Extra smooth motor movement
- Simple micro step & output current configuration via DIP switches
- Fault output
- Compact size and easy setup
- 50% automatic idle current reduction