For Nema 23 systems using individual drives, these convenient panel mount connectors offer a clean cabling solution. Complete with 12" of pre-soldered and heat-shrunk wire, these connectors facilitate easy assembly into your electrical enclosure, and plug directly into our Nema 23 motors and cables. Featuring rugged metal construction and large 20 AWG wires for added current capacity, these connectors are perfect for industrial applications.
To use, just run the colored wires to your stepper drive A, A-, B and B- terminals, trim back what you don't need, and connect the black wire to a common ground for the cable shield. Building a plug and play system has never been easier!
Wiring for the connector is as follows:
- Pin 8 A Red
- Pin 9 A- Green
- Pin 6 B Yellow
- Pin 7 B- Blue
- Pin 2 Ground Black
Price: $8.75
New in: Nema 23 CNC Electronics
